[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-20-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu3) ) #33-Ubuntu SMP Tue Mar 27 16:42:26 UTC 2012 (Ubuntu 3.2.0-20.33-generic 3.2.12) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-20-generic root=UUID=6f0f8242-c831-45df-af15-efefba5f7edb ro recovery nomodeset [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable) [ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: System manufacturer System Product Name/M4A79T Deluxe, BIOS 2304 11/19/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfe90000 page 4k [ 0.000000] kernel direct mapping tables up to cfe90000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ cfe8e000-cfe90000 [ 0.000000] RAMDISK: 364ea000 - 3726d000 [ 0.000000] ACPI: RSDP 00000000000fb860 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cfe90000 00038 (v01 111909 RSDT1708 20091119 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cfe90200 00084 (v01 111909 FACP1708 20091119 MSFT 00000097) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560) [ 0.000000] ACPI: DSDT 00000000cfe90440 0E638 (v01 A1160 A1160000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cfea8000 00040 [ 0.000000] ACPI: APIC 00000000cfe90390 0006C (v01 111909 APIC1708 20091119 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cfe90400 0003C (v01 111909 OEMMCFG 20091119 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cfea8040 00072 (v01 111909 OEMB1708 20091119 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cfe9f440 00038 (v01 111909 OEMHPET 20091119 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000230000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff] [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfe90 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2096671 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 831184 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1225728 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000 [ 0.000000] PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000 [ 0.000000] PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:30000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83072 r8192 d23424 u524288 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060826 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-20-generic root=UUID=6f0f8242-c831-45df-af15-efefba5f7edb ro recovery nomodeset [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 8093908k/9175040k available (6565k kernel code, 788356k absent, 292776k reserved, 6639k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3411.181 MHz processor. [ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6822.36 BogoMIPS (lpj=13644724) [ 0.008105] pid_max: default: 32768 minimum: 301 [ 0.008170] Security Framework initialized [ 0.008228] AppArmor: AppArmor initialized [ 0.008276] Yama: becoming mindful. [ 0.012153] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.014198] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.015117] Mount-cache hash table entries: 256 [ 0.015258] Initializing cgroup subsys cpuacct [ 0.015309] Initializing cgroup subsys memory [ 0.015363] Initializing cgroup subsys devices [ 0.015412] Initializing cgroup subsys freezer [ 0.015461] Initializing cgroup subsys blkio [ 0.015514] Initializing cgroup subsys perf_event [ 0.015583] tseg: 0000000000 [ 0.015593] CPU: Physical Processor ID: 0 [ 0.015641] CPU: Processor Core ID: 0 [ 0.015691] mce: CPU supports 6 MCE banks [ 0.016862] ACPI: Core revision 20110623 [ 0.020010] ftrace: allocating 27049 entries in 107 pages [ 0.028294] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068032] CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03 [ 0.072003] Performance Events: AMD PMU driver. [ 0.072003] ... version: 0 [ 0.072003] ... bit width: 48 [ 0.072003] ... generic registers: 4 [ 0.072003] ... value mask: 0000ffffffffffff [ 0.072003] ... max period: 00007fffffffffff [ 0.072003] ... fixed-purpose events: 0 [ 0.072003] ... event mask: 000000000000000f [ 0.072003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.072003] Booting Node 0, Processors #1 [ 0.072003] smpboot cpu 1: start_ip = 9a000 [ 0.160022] NMI watchdog enabled, takes one hw-pmu counter. [ 0.160128] #2 [ 0.160172] smpboot cpu 2: start_ip = 9a000 [ 0.252027] NMI watchdog enabled, takes one hw-pmu counter. [ 0.252126] #3 Ok. [ 0.252175] smpboot cpu 3: start_ip = 9a000 [ 0.344038] NMI watchdog enabled, takes one hw-pmu counter. [ 0.344101] Brought up 4 CPUs [ 0.344151] Total of 4 processors activated (27292.26 BogoMIPS). [ 0.348151] devtmpfs: initialized [ 0.349129] EVM: security.selinux [ 0.349179] EVM: security.SMACK64 [ 0.349228] EVM: security.capability [ 0.349368] PM: Registering ACPI NVS region at cfea8000 (163840 bytes) [ 0.349368] print_constraints: dummy: [ 0.349368] RTC time: 0:13:32, date: 04/02/12 [ 0.349368] NET: Registered protocol family 16 [ 0.349368] node 0 link 0: io port [1000, ffffff] [ 0.349368] TOM: 00000000d0000000 aka 3328M [ 0.349368] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.349368] node 0 link 0: mmio [e0000000, efffffff] [ 0.349368] Trying to unpack rootfs image as initramfs... [ 0.349368] ==> none [ 0.349368] node 0 link 0: mmio [f0000000, ffffffff] [ 0.349368] node 0 link 0: mmio [a0000, bffff] [ 0.349368] node 0 link 0: mmio [d0000000, dfffffff] [ 0.349368] TOM2: 0000000230000000 aka 8960M [ 0.349368] bus: [00, 07] on node 0 link 0 [ 0.349368] bus: 00 index 0 [io 0x0000-0xffff] [ 0.349368] bus: 00 index 1 [mem 0xf0000000-0xffffffff] [ 0.349368] bus: 00 index 2 [mem 0x000a0000-0x000bffff] [ 0.349368] bus: 00 index 3 [mem 0xd0000000-0xdfffffff] [ 0.349368] bus: 00 index 4 [mem 0x230000000-0xfcffffffff] [ 0.349368] Extended Config Space enabled on 1 nodes [ 0.349368] ACPI: bus type pci registered [ 0.349368] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.349368] PCI: not using MMCONFIG [ 0.349391] PCI: Using configuration type 1 for base access [ 0.349441] PCI: Using configuration type 1 for extended access [ 0.349587] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.349636] mtrr: probably your BIOS does not setup all CPUs. [ 0.349686] mtrr: corrected configuration. [ 0.352252] bio: create slab at 0 [ 0.352252] ACPI: Added _OSI(Module Device) [ 0.352252] ACPI: Added _OSI(Processor Device) [ 0.352252] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.352252] ACPI: Added _OSI(Processor Aggregator Device) [ 0.353057] ACPI: EC: Look up EC in DSDT [ 0.354419] ACPI: Executed 3 blocks of module-level executable AML code [ 0.472362] ACPI: Interpreter enabled [ 0.472417] ACPI: (supports S0 S1 S3 S4 S5) [ 0.472700] ACPI: Using IOAPIC for interrupt routing [ 0.472768] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.473529] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.536307] Freeing initrd memory: 13836k freed [ 0.596718] ACPI: No dock devices found. [ 0.596771] HEST: Table not found. [ 0.596822] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.596937] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.597090] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.597141] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.597192] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.599797] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.599854] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff] [ 0.599910] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.599978] pci 0000:00:00.0: [1002:5956] type 0 class 0x000600 [ 0.599989] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.600039] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604 [ 0.600077] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.600079] pci 0000:00:02.0: PME# disabled [ 0.600098] pci 0000:00:06.0: [1002:597c] type 1 class 0x000604 [ 0.600134] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.600136] pci 0000:00:06.0: PME# disabled [ 0.600148] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604 [ 0.600181] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.600183] pci 0000:00:07.0: PME# disabled [ 0.600198] pci 0000:00:0b.0: [1002:5980] type 1 class 0x000604 [ 0.600231] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 0.600233] pci 0000:00:0b.0: PME# disabled [ 0.600257] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 [ 0.600276] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007] [ 0.600286] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003] [ 0.600295] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007] [ 0.600304] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003] [ 0.600314] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f] [ 0.600323] pci 0000:00:11.0: reg 24: [mem 0xfbbfe400-0xfbbfe7ff] [ 0.600343] pci 0000:00:11.0: set SATA to AHCI mode [ 0.600441] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.600454] pci 0000:00:12.0: reg 10: [mem 0xfbbf6000-0xfbbf6fff] [ 0.600519] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.600532] pci 0000:00:12.1: reg 10: [mem 0xfbbf7000-0xfbbf7fff] [ 0.600605] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.600624] pci 0000:00:12.2: reg 10: [mem 0xfbbfe800-0xfbbfe8ff] [ 0.600708] pci 0000:00:12.2: supports D1 D2 [ 0.600710] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.600713] pci 0000:00:12.2: PME# disabled [ 0.600733] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.600747] pci 0000:00:13.0: reg 10: [mem 0xfbbfc000-0xfbbfcfff] [ 0.600812] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.600825] pci 0000:00:13.1: reg 10: [mem 0xfbbfd000-0xfbbfdfff] [ 0.600896] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.600914] pci 0000:00:13.2: reg 10: [mem 0xfbbfec00-0xfbbfecff] [ 0.600999] pci 0000:00:13.2: supports D1 D2 [ 0.601000] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.601004] pci 0000:00:13.2: PME# disabled [ 0.601027] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.601128] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.601144] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.601153] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.601163] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.601172] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.601181] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.601240] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.601261] pci 0000:00:14.2: reg 10: [mem 0xfbbf8000-0xfbbfbfff 64bit] [ 0.601328] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.601332] pci 0000:00:14.2: PME# disabled [ 0.601344] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.601421] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.601463] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.601477] pci 0000:00:14.5: reg 10: [mem 0xfbbff000-0xfbbfffff] [ 0.601545] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.601562] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.601575] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.601589] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.601606] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.601658] pci 0000:05:00.0: [1002:6738] type 0 class 0x000300 [ 0.601672] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.601683] pci 0000:05:00.0: reg 18: [mem 0xfbfc0000-0xfbfdffff 64bit] [ 0.601691] pci 0000:05:00.0: reg 20: [io 0xe000-0xe0ff] [ 0.601704] pci 0000:05:00.0: reg 30: [mem 0xfbfa0000-0xfbfbffff pref] [ 0.601738] pci 0000:05:00.0: supports D1 D2 [ 0.601761] pci 0000:05:00.1: [1002:aa88] type 0 class 0x000403 [ 0.601774] pci 0000:05:00.1: reg 10: [mem 0xfbffc000-0xfbffffff 64bit] [ 0.601838] pci 0000:05:00.1: supports D1 D2 [ 0.608058] pci 0000:00:02.0: PCI bridge to [bus 05-05] [ 0.608119] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.608122] pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.608125] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.608168] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200 [ 0.608183] pci 0000:04:00.0: reg 10: [io 0xd800-0xd8ff] [ 0.608207] pci 0000:04:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit] [ 0.608234] pci 0000:04:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref] [ 0.608296] pci 0000:04:00.0: supports D1 D2 [ 0.608298] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.608302] pci 0000:04:00.0: PME# disabled [ 0.608320] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.608380] pci 0000:00:06.0: PCI bridge to [bus 04-04] [ 0.608432] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.608434] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.608482] pci 0000:03:00.0: [1106:3403] type 0 class 0x000c00 [ 0.608512] pci 0000:03:00.0: reg 10: [mem 0xfbdff800-0xfbdfffff 64bit] [ 0.608527] pci 0000:03:00.0: reg 18: [io 0xc800-0xc8ff] [ 0.608656] pci 0000:03:00.0: supports D2 [ 0.608657] pci 0000:03:00.0: PME# supported from D2 D3hot D3cold [ 0.608662] pci 0000:03:00.0: PME# disabled [ 0.616063] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 0.616121] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff] [ 0.616123] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.616163] pci 0000:02:00.0: [1814:0781] type 0 class 0x000280 [ 0.616176] pci 0000:02:00.0: reg 10: [mem 0xfbcf0000-0xfbcfffff] [ 0.616260] pci 0000:02:00.0: PME# supported from D0 D3hot [ 0.616264] pci 0000:02:00.0: PME# disabled [ 0.624059] pci 0000:00:0b.0: PCI bridge to [bus 02-02] [ 0.624121] pci 0000:00:0b.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.624186] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode) [ 0.624243] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.624245] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.624247] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.624248] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.624250] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode) [ 0.624252] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.624268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.624388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.624409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.624425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.624443] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEB._PRT] [ 0.624469] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.624504] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.624554] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.624611] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.627416] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.627883] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15) [ 0.628330] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15) [ 0.628795] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.629262] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.629825] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.630389] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) [ 0.630854] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.631467] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.631467] vgaarb: loaded [ 0.631467] vgaarb: bridge control possible 0000:05:00.0 [ 0.631467] i2c-core: driver [aat2870] using legacy suspend method [ 0.631467] i2c-core: driver [aat2870] using legacy resume method [ 0.631467] SCSI subsystem initialized [ 0.631467] libata version 3.00 loaded. [ 0.632044] usbcore: registered new interface driver usbfs [ 0.632100] usbcore: registered new interface driver hub [ 0.632161] usbcore: registered new device driver usb [ 0.632161] PCI: Using ACPI for IRQ routing [ 0.641293] PCI: pci_cache_line_size set to 64 bytes [ 0.641299] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.641424] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.641425] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff [ 0.641488] NetLabel: Initializing [ 0.641538] NetLabel: domain hash size = 128 [ 0.641586] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.641641] NetLabel: unlabeled traffic allowed by default [ 0.641719] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.641719] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.644062] Switching to clocksource hpet [ 0.648253] AppArmor: AppArmor Filesystem Enabled [ 0.648317] pnp: PnP ACPI init [ 0.648375] ACPI: bus type pnp registered [ 0.648493] pnp 00:00: [bus 00-ff] [ 0.648495] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.648496] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.648498] pnp 00:00: [io 0x0d00-0xffff window] [ 0.648499] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.648501] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.648502] pnp 00:00: [mem 0xcff00000-0xdfffffff window] [ 0.648504] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.648534] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.648558] pnp 00:01: [dma 4] [ 0.648559] pnp 00:01: [io 0x0000-0x000f] [ 0.648561] pnp 00:01: [io 0x0081-0x0083] [ 0.648562] pnp 00:01: [io 0x0087] [ 0.648563] pnp 00:01: [io 0x0089-0x008b] [ 0.648564] pnp 00:01: [io 0x008f] [ 0.648565] pnp 00:01: [io 0x00c0-0x00df] [ 0.648583] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.648592] pnp 00:02: [io 0x0070-0x0071] [ 0.648600] pnp 00:02: [irq 8] [ 0.648619] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.648625] pnp 00:03: [io 0x0061] [ 0.648640] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.648645] pnp 00:04: [io 0x00f0-0x00ff] [ 0.648648] pnp 00:04: [irq 13] [ 0.648666] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.648690] pnp 00:05: [mem 0xfed00000-0xfed003ff] [ 0.648707] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.648752] pnp 00:06: [io 0x0060] [ 0.648753] pnp 00:06: [io 0x0064] [ 0.648754] pnp 00:06: [mem 0xfec00000-0xfec00fff] [ 0.648756] pnp 00:06: [mem 0xfee00000-0xfee00fff] [ 0.648790] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.648842] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.648892] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.648993] pnp 00:07: [io 0x0010-0x001f] [ 0.648994] pnp 00:07: [io 0x0022-0x003f] [ 0.648996] pnp 00:07: [io 0x0062-0x0063] [ 0.648997] pnp 00:07: [io 0x0065-0x006f] [ 0.648998] pnp 00:07: [io 0x0072-0x007f] [ 0.648999] pnp 00:07: [io 0x0080] [ 0.649000] pnp 00:07: [io 0x0084-0x0086] [ 0.649001] pnp 00:07: [io 0x0088] [ 0.649002] pnp 00:07: [io 0x008c-0x008e] [ 0.649004] pnp 00:07: [io 0x0090-0x009f] [ 0.649005] pnp 00:07: [io 0x00a2-0x00bf] [ 0.649006] pnp 00:07: [io 0x00b1] [ 0.649007] pnp 00:07: [io 0x00e0-0x00ef] [ 0.649008] pnp 00:07: [io 0x04d0-0x04d1] [ 0.649009] pnp 00:07: [io 0x040b] [ 0.649011] pnp 00:07: [io 0x04d6] [ 0.649012] pnp 00:07: [io 0x0c00-0x0c01] [ 0.649013] pnp 00:07: [io 0x0c14] [ 0.649014] pnp 00:07: [io 0x0c50-0x0c51] [ 0.649015] pnp 00:07: [io 0x0c52] [ 0.649016] pnp 00:07: [io 0x0c6c] [ 0.649017] pnp 00:07: [io 0x0c6f] [ 0.649018] pnp 00:07: [io 0x0cd0-0x0cd1] [ 0.649020] pnp 00:07: [io 0x0cd2-0x0cd3] [ 0.649021] pnp 00:07: [io 0x0cd4-0x0cd5] [ 0.649022] pnp 00:07: [io 0x0cd6-0x0cd7] [ 0.649023] pnp 00:07: [io 0x0cd8-0x0cdf] [ 0.649024] pnp 00:07: [io 0x0b00-0x0b3f] [ 0.649026] pnp 00:07: [io 0x0800-0x089f] [ 0.649027] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 0.649028] pnp 00:07: [io 0x0b00-0x0b0f] [ 0.649030] pnp 00:07: [io 0x0b20-0x0b3f] [ 0.649031] pnp 00:07: [io 0x0900-0x090f] [ 0.649032] pnp 00:07: [io 0x0910-0x091f] [ 0.649034] pnp 00:07: [io 0xfe00-0xfefe] [ 0.649036] pnp 00:07: [io 0x0060] [ 0.649037] pnp 00:07: [io 0x0064] [ 0.649038] pnp 00:07: [mem 0xcff00000-0xcfffffff] [ 0.649039] pnp 00:07: [mem 0xffb80000-0xffbfffff] [ 0.649041] pnp 00:07: [mem 0xfec10000-0xfec1001f] [ 0.649095] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.649145] system 00:07: [io 0x040b] has been reserved [ 0.649196] system 00:07: [io 0x04d6] has been reserved [ 0.649246] system 00:07: [io 0x0c00-0x0c01] has been reserved [ 0.649296] system 00:07: [io 0x0c14] has been reserved [ 0.649346] system 00:07: [io 0x0c50-0x0c51] has been reserved [ 0.649396] system 00:07: [io 0x0c52] has been reserved [ 0.649445] system 00:07: [io 0x0c6c] has been reserved [ 0.649496] system 00:07: [io 0x0c6f] has been reserved [ 0.649546] system 00:07: [io 0x0cd0-0x0cd1] has been reserved [ 0.649596] system 00:07: [io 0x0cd2-0x0cd3] has been reserved [ 0.649646] system 00:07: [io 0x0cd4-0x0cd5] has been reserved [ 0.649697] system 00:07: [io 0x0cd6-0x0cd7] has been reserved [ 0.649747] system 00:07: [io 0x0cd8-0x0cdf] has been reserved [ 0.649797] system 00:07: [io 0x0b00-0x0b3f] has been reserved [ 0.649847] system 00:07: [io 0x0800-0x089f] has been reserved [ 0.649897] system 00:07: [io 0x0b00-0x0b0f] has been reserved [ 0.649947] system 00:07: [io 0x0b20-0x0b3f] has been reserved [ 0.649997] system 00:07: [io 0x0900-0x090f] has been reserved [ 0.650048] system 00:07: [io 0x0910-0x091f] has been reserved [ 0.650098] system 00:07: [io 0xfe00-0xfefe] has been reserved [ 0.650148] system 00:07: [mem 0xcff00000-0xcfffffff] has been reserved [ 0.650199] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.650249] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.650300] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.650609] pnp 00:08: [io 0x03f8-0x03ff] [ 0.650613] pnp 00:08: [irq 4] [ 0.650614] pnp 00:08: [dma 0 disabled] [ 0.650670] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.650992] pnp 00:09: [io 0x03f0-0x03f5] [ 0.650994] pnp 00:09: [io 0x03f7] [ 0.650997] pnp 00:09: [irq 6] [ 0.650998] pnp 00:09: [dma 2] [ 0.651032] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.651139] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled] [ 0.651141] pnp 00:0a: [io 0x0230-0x023f] [ 0.651142] pnp 00:0a: [io 0x0290-0x029f] [ 0.651143] pnp 00:0a: [io 0x0f40-0x0f4f] [ 0.651144] pnp 00:0a: [io 0x0a30-0x0a3f] [ 0.651174] system 00:0a: [io 0x0230-0x023f] has been reserved [ 0.651224] system 00:0a: [io 0x0290-0x029f] has been reserved [ 0.651275] system 00:0a: [io 0x0f40-0x0f4f] has been reserved [ 0.651325] system 00:0a: [io 0x0a30-0x0a3f] has been reserved [ 0.651375] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.651395] pnp 00:0b: [mem 0xe0000000-0xefffffff] [ 0.651422] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.651472] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.651974] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 0.651976] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 0.651977] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.651979] pnp 00:0c: [mem 0x00100000-0xcfefffff] [ 0.651980] pnp 00:0c: [mem 0xfec00000-0xffffffff] [ 0.651983] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.652050] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.652108] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.652166] pnp 00:0c: disabling [mem 0x00100000-0xcfefffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.652256] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.652307] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.652379] pnp: PnP ACPI: found 13 devices [ 0.652428] ACPI: ACPI bus type pnp unregistered [ 0.658873] PCI: max bus depth: 1 pci_try_num: 2 [ 0.658894] pci 0000:00:02.0: PCI bridge to [bus 05-05] [ 0.658945] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.658997] pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.659048] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.659107] pci 0000:00:06.0: PCI bridge to [bus 04-04] [ 0.659157] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.659209] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.659261] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 0.659312] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff] [ 0.659363] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.659416] pci 0000:00:0b.0: PCI bridge to [bus 02-02] [ 0.659467] pci 0000:00:0b.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.659520] pci 0000:00:14.4: PCI bridge to [bus 01-01] [ 0.659588] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.659640] pci 0000:00:02.0: setting latency timer to 64 [ 0.659644] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.659695] pci 0000:00:06.0: setting latency timer to 64 [ 0.659701] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.659752] pci 0000:00:07.0: setting latency timer to 64 [ 0.659756] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.659807] pci 0000:00:0b.0: setting latency timer to 64 [ 0.659813] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.659815] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.659816] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.659818] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.659819] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff] [ 0.659821] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.659822] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.659824] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.659826] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.659828] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.659829] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.659831] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.659832] pci_bus 0000:03: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.659834] pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.659836] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.659838] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.659839] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.659841] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 0.659843] pci_bus 0000:01: resource 8 [mem 0xcff00000-0xdfffffff] [ 0.659844] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.659869] NET: Registered protocol family 2 [ 0.660085] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.661102] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.663039] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.663314] TCP: Hash tables configured (established 524288 bind 65536) [ 0.663365] TCP reno registered [ 0.663426] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.663518] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.663657] NET: Registered protocol family 1 [ 0.663737] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.768039] pci 0000:00:12.0: PCI INT A disabled [ 0.768100] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.848037] pci 0000:00:12.1: PCI INT A disabled [ 0.848104] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.848194] pci 0000:00:12.2: PCI INT B disabled [ 0.848249] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.928040] pci 0000:00:13.0: PCI INT A disabled [ 0.928099] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.008042] pci 0000:00:13.1: PCI INT A disabled [ 1.008102] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.008192] pci 0000:00:13.2: PCI INT B disabled [ 1.008255] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.088036] pci 0000:00:14.5: PCI INT C disabled [ 1.088101] pci 0000:05:00.0: Boot video device [ 1.088112] PCI: CLS 64 bytes, default 64 [ 1.089477] PCI-DMA: Disabling AGP. [ 1.089599] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.089650] PCI-DMA: using GART IOMMU. [ 1.089700] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.092725] IBS: LVT offset 1 assigned [ 1.092791] perf: AMD IBS detected (0x0000001f) [ 1.092946] audit: initializing netlink socket (disabled) [ 1.093009] type=2000 audit(1333325612.088:1): initialized [ 1.125006] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.159440] VFS: Disk quotas dquot_6.5.2 [ 1.159530] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.159979] fuse init (API version 7.17) [ 1.160112] msgmni has been set to 15964 [ 1.160540] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.160627] io scheduler noop registered [ 1.160679] io scheduler deadline registered [ 1.160746] io scheduler cfq registered (default) [ 1.160915] pcieport 0000:00:02.0: setting latency timer to 64 [ 1.160947] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.161036] pcieport 0000:00:06.0: setting latency timer to 64 [ 1.161058] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X [ 1.161133] pcieport 0000:00:07.0: setting latency timer to 64 [ 1.161154] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X [ 1.161225] pcieport 0000:00:0b.0: setting latency timer to 64 [ 1.161246] pcieport 0000:00:0b.0: irq 43 for MSI/MSI-X [ 1.161302] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.161366] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.161501] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.161559] ACPI: Power Button [PWRB] [ 1.161635] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.161691] ACPI: Power Button [PWRF] [ 1.336352] ERST: Table is not found! [ 1.336403] GHES: HEST is not enabled! [ 1.336525] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.357033] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.404836] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.452215] Linux agpgart interface v0.103 [ 1.453275] brd: module loaded [ 1.453847] loop: module loaded [ 1.454024] ahci 0000:00:11.0: version 3.0 [ 1.454040] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.454140] ahci 0000:00:11.0: irq 44 for MSI/MSI-X [ 1.454213] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.454271] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs [ 1.454726] scsi0 : ahci [ 1.454838] scsi1 : ahci [ 1.454939] scsi2 : ahci [ 1.457633] scsi3 : ahci [ 1.457747] ata1: SATA max UDMA/133 abar m1024@0xfbbfe400 port 0xfbbfe500 irq 44 [ 1.457806] ata2: SATA max UDMA/133 abar m1024@0xfbbfe400 port 0xfbbfe580 irq 44 [ 1.457863] ata3: SATA max UDMA/133 abar m1024@0xfbbfe400 port 0xfbbfe600 irq 44 [ 1.457921] ata4: SATA max UDMA/133 abar m1024@0xfbbfe400 port 0xfbbfe680 irq 44 [ 1.458096] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.458206] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 1.458465] Fixed MDIO Bus: probed [ 1.458528] tun: Universal TUN/TAP device driver, 1.6 [ 1.458579] tun: (C) 1999-2004 Max Krasnyansky [ 1.458665] PPP generic driver version 2.4.2 [ 1.458796] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.458914] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.458974] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.459066] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.459130] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.459208] ehci_hcd 0000:00:12.2: debug port 1 [ 1.459274] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbbfe800 [ 1.468034] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.468191] hub 1-0:1.0: USB hub found [ 1.468242] hub 1-0:1.0: 6 ports detected [ 1.468398] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.468458] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.468541] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.468602] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.468675] ehci_hcd 0000:00:13.2: debug port 1 [ 1.468741] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbbfec00 [ 1.480039] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.480177] hub 2-0:1.0: USB hub found [ 1.480227] hub 2-0:1.0: 6 ports detected [ 1.480345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.480446] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.480507] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.480589] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.480665] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbbf6000 [ 1.540094] hub 3-0:1.0: USB hub found [ 1.540149] hub 3-0:1.0: 3 ports detected [ 1.540303] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.540364] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.540446] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.540514] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbbf7000 [ 1.600098] hub 4-0:1.0: USB hub found [ 1.600152] hub 4-0:1.0: 3 ports detected [ 1.600306] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.600366] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.600447] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.600522] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbbfc000 [ 1.660093] hub 5-0:1.0: USB hub found [ 1.660147] hub 5-0:1.0: 3 ports detected [ 1.660301] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.660362] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.660447] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.660515] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbbfd000 [ 1.720116] hub 6-0:1.0: USB hub found [ 1.720170] hub 6-0:1.0: 3 ports detected [ 1.720321] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.720382] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.720464] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.720533] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbbff000 [ 1.776120] ata4: SATA link down (SStatus 0 SControl 300) [ 1.776200] ata2: SATA link down (SStatus 0 SControl 300) [ 1.780148] hub 7-0:1.0: USB hub found [ 1.780203] hub 7-0:1.0: 2 ports detected [ 1.780301] uhci_hcd: USB Universal Host Controller Interface driver [ 1.780395] usbcore: registered new interface driver libusual [ 1.780467] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.780865] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.780918] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.781058] mousedev: PS/2 mouse device common for all mice [ 1.781213] rtc_cmos 00:02: RTC can wake from S4 [ 1.781344] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.781418] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.781518] device-mapper: uevent: version 1.0.3 [ 1.781610] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.781670] cpuidle: using governor ladder [ 1.781720] cpuidle: using governor menu [ 1.781770] EFI Variables Facility v0.08 2004-May-17 [ 1.781952] TCP cubic registered [ 1.782065] NET: Registered protocol family 10 [ 1.782405] NET: Registered protocol family 17 [ 1.782464] Registering the dns_resolver key type [ 1.782612] PM: Hibernation image not present or could not be loaded. [ 1.782618] registered taskstats version 1 [ 1.804040] Magic number: 8:300:202 [ 1.804181] rtc_cmos 00:02: setting system clock to 2012-04-02 00:13:33 UTC (1333325613) [ 1.804250] powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00) [ 1.804311] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 1.804312] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 1.804425] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.804475] EDD information not available. [ 1.948049] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.948126] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.951409] ata3.00: ATA-8: WDC WD20EADS-00S2B0, 04.05G04, max UDMA/133 [ 1.951462] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.955403] ata3.00: configured for UDMA/133 [ 1.961768] ata1.00: ATA-8: WDC WD5000AAKS-22YGA0, 12.01C02, max UDMA/133 [ 1.961820] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.962848] ata1.00: configured for UDMA/133 [ 1.963042] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 12.0 PQ: 0 ANSI: 5 [ 1.963226] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.963246] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.963350] sd 0:0:0:0: [sda] Write Protect is off [ 1.963352] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.963393] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.963613] scsi 2:0:0:0: Direct-Access ATA WDC WD20EADS-00S 04.0 PQ: 0 ANSI: 5 [ 1.963759] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.963768] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.963955] sd 2:0:0:0: [sdb] Write Protect is off [ 1.964020] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.964051] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.978792] sda: sda1 sda2 sda3 [ 1.979197] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.006200] sdb: sdb1 sdb2 [ 2.006577] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.007637] Freeing unused kernel memory: 920k freed [ 2.007850] Write protecting the kernel read-only data: 12288k [ 2.011624] Freeing unused kernel memory: 1608k freed [ 2.014691] Freeing unused kernel memory: 1200k freed [ 2.026896] udevd[143]: starting version 175 [ 2.039675] firewire_ohci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.039738] firewire_ohci 0000:03:00.0: setting latency timer to 64 [ 2.042026] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.042094] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.042167] r8169 0000:04:00.0: setting latency timer to 64 [ 2.042221] r8169 0000:04:00.0: irq 45 for MSI/MSI-X [ 2.042502] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90000c7e000, e0:cb:4e:7a:fe:34, XID 18000000 IRQ 45 [ 2.042560] r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 2.053371] scsi4 : pata_atiixp [ 2.053619] scsi5 : pata_atiixp [ 2.054077] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.054129] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.075818] FDC 0 is a post-1991 82077 [ 2.092060] Refined TSC clocksource calibration: 3411.621 MHz. [ 2.092113] Switching to clocksource tsc [ 2.100079] firewire_ohci: Added fw-ohci device 0000:03:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11 [ 2.156028] usb 4-3: new full-speed USB device number 2 using ohci_hcd [ 2.232518] ata5.01: ATAPI: _NEC DVD_RW ND-3520AW, 3.04, max UDMA/33 [ 2.248442] ata5.01: configured for UDMA/33 [ 2.250141] scsi 4:0:1:0: CD-ROM _NEC DVD_RW ND-3520AW 3.04 PQ: 0 ANSI: 5 [ 2.251596] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 2.251649] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.251804] sr 4:0:1:0: Attached scsi CD-ROM sr0 [ 2.251874] sr 4:0:1:0: Attached scsi generic sg2 type 5 [ 2.291421] EXT4-fs (sda3): INFO: recovery required on readonly filesystem [ 2.291475] EXT4-fs (sda3): write access will be enabled during recovery [ 2.342109] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.3/input/input2 [ 2.342232] generic-usb 0003:08BB:2900.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:12.1-3/input3 [ 2.342306] usbcore: registered new interface driver usbhid [ 2.342357] usbhid: USB HID core driver [ 2.472022] usb 6-2: new low-speed USB device number 2 using ohci_hcd [ 2.488837] EXT4-fs (sda3): recovery complete [ 2.489413] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.600091] firewire_core: created device fw0: GUID 001e8c0000f06c4b, S400 [ 2.648233] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input3 [ 2.648367] generic-usb 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:13.1-2/input0 [ 2.660127] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/input/input4 [ 2.660280] generic-usb 0003:046D:C312.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:13.1-2/input1 [ 2.928020] usb 6-3: new low-speed USB device number 3 using ohci_hcd [ 3.102190] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input5 [ 3.102345] generic-usb 0003:046D:C018.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-3/input0 [ 3.901685] udevd[353]: starting version 175 [ 4.485503] wmi: Mapper loaded [ 4.600402] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f] [ 4.600462] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.618265] MCE: In-kernel MCE decoding enabled. [ 4.801377] EDAC MC: Ver: 2.1.0 [ 4.817289] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 4.817395] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 4.838641] AMD64 EDAC driver v3.4.0 [ 4.838738] EDAC amd64: DRAM ECC disabled. [ 4.838795] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 4.838796] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 4.838797] (Note that use of the override may cause unknown side effects.) [ 4.928498] [drm] Initialized drm 1.1.0 20060810 [ 4.974963] cfg80211: Calling CRDA to update world regulatory domain [ 5.074798] [drm] VGACON disable radeon kernel modesetting. [ 5.075048] pci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5.075102] pci 0000:05:00.0: setting latency timer to 64 [ 5.075210] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.075261] [drm] No driver support for vblank timestamp query. [ 5.075311] [drm] Initialized radeon 1.33.0 20080528 for 0000:05:00.0 on minor 0 [ 5.221276] rt2800pci 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 5.221341] rt2800pci 0000:02:00.0: setting latency timer to 64 [ 5.228594] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 5.228597] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 5.228601] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 5.228603] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 5.228605] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 5.228607] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 5.228608] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 5.228610] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 5.228611] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 5.228613] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 5.228614] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 5.228616] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 5.228617] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 5.228619] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 5.228620] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 5.228622] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 5.228624] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 5.228625] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 5.228627] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 5.228629] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 5.228630] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 5.228632] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 5.228633] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 5.228635] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 5.228636] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 5.228638] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 5.228640] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 5.228641] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 5.254043] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 5.254371] Registered led device: rt2800pci-phy0::radio [ 5.254386] Registered led device: rt2800pci-phy0::assoc [ 5.254399] Registered led device: rt2800pci-phy0::quality [ 5.400221] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.400226] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5.796196] usbcore: registered new interface driver snd-usb-audio [ 5.803379] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.896593] hda_codec: ALC1200: BIOS auto-probing. [ 5.907456] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 5.907516] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 5.907557] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 5.907597] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 5.907641] input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 5.907681] input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 5.907719] input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 5.907759] input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 5.907969] snd_hda_intel 0000:05:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.908028] snd_hda_intel 0000:05:00.1: irq 46 for MSI/MSI-X [ 5.908048] snd_hda_intel 0000:05:00.1: setting latency timer to 64 [ 6.058519] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 6.058572] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card2/input14 [ 6.117280] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 6.117283] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.117285] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 6.117286] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.117288] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 6.117289] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.117291] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 6.117292] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.117294] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 6.117295] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.117297] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 6.117298] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.117300] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 6.117301] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.117303] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 6.117304] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.117306] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 6.117307] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.117309] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 6.117310] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.117312] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 6.117313] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.117315] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 6.117316] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.117318] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 6.117319] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.117321] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 6.117322] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.117324] cfg80211: World regulatory domain updated: [ 6.117325] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.117327] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.117328] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.117330] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.117331] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.117333] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.844771] Adding 10485756k swap on /dev/sda2. Priority:-1 extents:1 across:10485756k [ 10.995427] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 11.284925] init: plymouth-upstart-bridge main process (935) terminated with status 1 [ 11.572077] Bluetooth: Core ver 2.16 [ 11.572093] NET: Registered protocol family 31 [ 11.572095] Bluetooth: HCI device and connection manager initialized [ 11.572097] Bluetooth: HCI socket layer initialized [ 11.572098] Bluetooth: L2CAP socket layer initialized [ 11.572101] Bluetooth: SCO socket layer initialized [ 11.609534] Bluetooth: RFCOMM TTY layer initialized [ 11.609537] Bluetooth: RFCOMM socket layer initialized [ 11.609539] Bluetooth: RFCOMM ver 1.11 [ 11.613048] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.613050] Bluetooth: BNEP filters: protocol multicast [ 12.277290] r8169 0000:04:00.0: eth0: link down [ 12.277951] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.538201] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.624847] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.625593] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 13.986461] r8169 0000:04:00.0: eth0: link up [ 13.987112] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 124.168144] AMD64 EDAC driver v3.4.0 [ 124.172166] EDAC amd64: DRAM ECC disabled. [ 124.172173] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 124.172174] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 124.172175] (Note that use of the override may cause unknown side effects.) [ 125.095151] lp: driver loaded but no devices found [ 129.759349] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 129.823903] init: flush-early-job-log main process (2141) terminated with status 1 [ 129.825609] init: failsafe main process (2138) killed by TERM signal [ 129.846750] type=1400 audit(1333325741.539:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=2227 comm="apparmor_parser" [ 129.847349] type=1400 audit(1333325741.539:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=2228 comm="apparmor_parser" [ 129.848581] type=1400 audit(1333325741.543:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2228 comm="apparmor_parser" [ 129.848763] type=1400 audit(1333325741.543:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=2228 comm="apparmor_parser" [ 129.848888] type=1400 audit(1333325741.543:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=2233 comm="apparmor_parser" [ 129.849272] type=1400 audit(1333325741.543:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=2233 comm="apparmor_parser" [ 129.850184] type=1400 audit(1333325741.543:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=2234 comm="apparmor_parser" [ 129.850576] type=1400 audit(1333325741.543:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=2234 comm="apparmor_parser" [ 129.850976] type=1400 audit(1333325741.543:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=2240 comm="apparmor_parser" [ 129.851870] type=1400 audit(1333325741.543:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=2229 comm="apparmor_parser" [ 129.852169] ppdev: user-space parallel port driver [ 130.000322] init: udev-fallback-graphics main process (2100) terminated with status 1 [ 130.047851] init: friendly-recovery post-stop process (1787) terminated with status 1 [ 157.099214] audit_printk_skb: 27 callbacks suppressed [ 157.099217] type=1400 audit(1333325768.791:21): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=3362 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 207.276786] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)